Signatures.
Signatures.
I have re-written the signature graphic
http://signature.ukboincteam.com
this now updates every hour, but that will be phased back to every 4 hours once I am happy it all works.
Now that this one seems to be working ok, I am going to stop the old one.
This will be stopped on Friday 23rd June.
There are only a few colours available at the moment but I am working on adding about 40 more very soon.
Darren
http://signature.ukboincteam.com
this now updates every hour, but that will be phased back to every 4 hours once I am happy it all works.
Now that this one seems to be working ok, I am going to stop the old one.
This will be stopped on Friday 23rd June.
There are only a few colours available at the moment but I am working on adding about 40 more very soon.
Darren
-
- Posts: 315
- Joined: Mon Mar 13, 2006 12:00 am
Re: Signatures.
Nnnnnnnnnnnnnnnnnnnnnnnooooooooooooooooooooooooooooooooooooooooooooooooooooooo!!!!!!!!!!!!!!!!!!!!! :sad2:Dazza wrote:I am going to stop the old one.
This will be stopped on Friday 23rd June.
It's not as I hate the new one, I just prefer the old one. IMHO it looks cleaner and neater.
Any chance of a header without the curved ends - that's the part I don't like.
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
Hi,
I check which projects your cpid is attached to once every day and then I update thos projects every hour.
If you attach to a new project, the program will not find out until the next morning, assuming you have used the same email address and the cpid has updated correctly, but once the new project has been recognised the updates will be automatic.
I'll run a manual update now and lets see what happens.
OK, it has noticed you also do seti and rosetta so at 4 mins past 7, your signature should recognise this.
Darren
I check which projects your cpid is attached to once every day and then I update thos projects every hour.
If you attach to a new project, the program will not find out until the next morning, assuming you have used the same email address and the cpid has updated correctly, but once the new project has been recognised the updates will be automatic.
I'll run a manual update now and lets see what happens.
OK, it has noticed you also do seti and rosetta so at 4 mins past 7, your signature should recognise this.
Darren
-
- Posts: 315
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 315
- Joined: Mon Mar 13, 2006 12:00 am
You preferred the old style signature?
No probs cus there will be a "compatability mode".
Need to add some more colours first (next week) and the individual stats (for people that want those - nearly done) and the ability to "hide" some stats so that the lists can be made smaller (again for people that want that).
Also got to finish updating the new web site (weekend) and fix the cookie problems.
Then there are the team stats, if other teams want their stats doing as well (not sure how I can do this at the minute but I am sure I can find a way.
Maybe I can scrape the data from BOINCStats :lol:
No probs cus there will be a "compatability mode".
Need to add some more colours first (next week) and the individual stats (for people that want those - nearly done) and the ability to "hide" some stats so that the lists can be made smaller (again for people that want that).
Also got to finish updating the new web site (weekend) and fix the cookie problems.
Then there are the team stats, if other teams want their stats doing as well (not sure how I can do this at the minute but I am sure I can find a way.
Maybe I can scrape the data from BOINCStats :lol:
-
- Posts: 570
- Joined: Thu Mar 23, 2006 12:00 am
added individual project signatures if anyone is interested.
Go to sig site
http://signature.ukboincteam.com
sign in and then select manage projects
Go to sig site
http://signature.ukboincteam.com
sign in and then select manage projects
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
Kewl we have got a non team member using it, someone from Italy
Looks like he/she likes the new changes and is using the new 3 column option. Link
Looks like he/she likes the new changes and is using the new 3 column option. Link
-
- Posts: 570
- Joined: Thu Mar 23, 2006 12:00 am
-
- UBT Forum Admin
- Posts: 9692
- Joined: Mon Mar 13, 2006 12:00 am
- Location: NW Midlands
- Contact:
Dazza wrote:edit: There is some space on the three column dispay for "advertising"
Any ideas for a catchy line?
How much space / characters can be utilised?
And given that the logo could be used by both members and non-members, so something specific to help gain us more members might be worthy?
Here's a few:
Join UK BOINC Team today!
UK BOINC Team boincs for everyone
Do you crunch? - then join UK BOINC Team
BOINC waits for no man - crunch for UBT!
That's enough - going to bed now ! (Had a long day).
regards,
Tim
-
- Posts: 128
- Joined: Sun Apr 09, 2006 1:00 am
Would it be posible to add a line between the user name and the column headings to place the messages? That way it would be displayed regardless of how many columns wide the graphic is.Dazza wrote:The space varies.
But all of the space between the date and the version no.
I have added 3 of your 4 but any other ideas?
As it would also be above the stats, I think it would be in a more prominent position. Perhaps a bold font as well.
-
- Posts: 570
- Joined: Thu Mar 23, 2006 12:00 am
Hmm, I can do that.
I will give set it up this afternoon cus I am busy playing with house alarms at the minute.
EDIT: OK added it to the top but not in bold becasue that looks odd.
There are 5 different "adverts" and you get a different one based on the width of the signature.
I am not too sure about it.
I will give set it up this afternoon cus I am busy playing with house alarms at the minute.
EDIT: OK added it to the top but not in bold becasue that looks odd.
There are 5 different "adverts" and you get a different one based on the width of the signature.
I am not too sure about it.
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
Replied to your PM. Still can't login and although it would be nice to have 17,000 credits on Einstein, I'm nowhere near yetDarren wrote:I have set you up James and dropped you a PM
Until the site I use to tell me who has joined what comes back on line then new projects won't be added automatically.
Add a list here & I'll do them manually.
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
-
- Posts: 17206
- Joined: Sat May 06, 2006 1:00 am
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
On the UK Boinc Team Signature page it states rather boldly
"The most up-to-date Boinc stats on the planet!"
Might one enquire as to what planet this might be? as although I know there is a problem with PG my sig has not altered in almost 2 weeks, further to this I joined Xtremelabs a month ago and RCN 5 days ago and neither are yet showing on my sigs.
I feel this is either due to blatant racism (The phrase, 'Little green men will soon be banned as not being PC) or gross neglect on the part of The Dazza as he devotes all his waking hours praying to the UotD Gods.
If this matter is not rectified forthwith, I feel I have no other option than to take up American citizenship and sue under the Trades Description Act.
Little Emerald Tinted Reptile.
"The most up-to-date Boinc stats on the planet!"
Might one enquire as to what planet this might be? as although I know there is a problem with PG my sig has not altered in almost 2 weeks, further to this I joined Xtremelabs a month ago and RCN 5 days ago and neither are yet showing on my sigs.
I feel this is either due to blatant racism (The phrase, 'Little green men will soon be banned as not being PC) or gross neglect on the part of The Dazza as he devotes all his waking hours praying to the UotD Gods.
If this matter is not rectified forthwith, I feel I have no other option than to take up American citizenship and sue under the Trades Description Act.
Little Emerald Tinted Reptile.
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
OK, I have added a small enhancement to the signature code.
If you are doing Dimes or Majestic 12 the credits for these can now be added to the signature.
On the "Manage Projects Page" there is a space to add you id's for these two projects.
Dimes id is your username but Majestic give you a numeric one.
Enter this info in the boxes supplied. Click 'Change Settings' and if you have entered the correct info these should appear on the signature.
If there are any other non-boinc projects that produce stats let me know and I will look at adding those as well.
If you are doing Dimes or Majestic 12 the credits for these can now be added to the signature.
On the "Manage Projects Page" there is a space to add you id's for these two projects.
Dimes id is your username but Majestic give you a numeric one.
Enter this info in the boxes supplied. Click 'Change Settings' and if you have entered the correct info these should appear on the signature.
If there are any other non-boinc projects that produce stats let me know and I will look at adding those as well.
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
I like it :hello1: much better than me having to have that super wide thing or even the tallest sig on the planetDarren wrote:For the space concious people that have loads of projects I have added a new animated signature.
This can be found on the graphic style page and looks like mine below...
The frames flip over every 3 seconds but this will be adjustable shortly.
-
- Posts: 1630
- Joined: Mon Nov 06, 2006 12:00 am
-
- Posts: 1434
- Joined: Tue Jan 09, 2007 12:00 am
-
- Posts: 3790
- Joined: Mon Mar 13, 2006 12:00 am
-
- Posts: 1630
- Joined: Mon Nov 06, 2006 12:00 am
-
- Posts: 1630
- Joined: Mon Nov 06, 2006 12:00 am